LEDMyplace T8 8ft LED Tube/Bulb, 32/36/40/48W Wattage Adjustable, 130lm/w, 3000K/4000K/5000K/6500K CCT Changeable, Clear, R17D Base, Ballast Bypass

Ballast Bypass: This LED tube requires you to either remove the ballast or bypass it. We have prepared a step-by-step guide to help you bypass the ballast to successfully install your LED tube. Flicker Free: Whether it’s a 2ft, 4ft, or 8ft LED tube, one of the jaw-dropping features of LED tubes is that they don’t flicker unlike what you would have observed in the case of fluorescent tubes. The LED tubes start instantly and once they start, they don’t flicker and produce a humming sound. Low Maintenance Cost: The LED tubes will require low or no maintenance if you are going for a ballast bypass option of LED tube installation. Though not very frequent, you may have to replace the ballasts once in the total lifetime of LED tubes, if you are going for the ballast compatibility option and hence you will have to bear with slightly higher maintenance costs when choosing the former option. Energy Saving: The LED tubes can save energy up to 75% in extreme contrast with fluorescent tubes that consume a lot of energy to bring you a higher energy bill. We highly recommend going for our LED tubes which are an excellent combo of lumen brightness and energy-savings. Aluminium Heat Sink: The LED tubes have a big heat sink made of aluminum and that’s a pretty good reason why the LED tubes don’t warm up too soon to be in consistent operation. This is in extreme contrast with the fluorescent tubes that warmed up too soon and required cooling down to operate efficiently.